Item Number:
RMM-213
- please refer to this number when making inquiries.
Condition: Used
Manufacturer: Hennecke Model: HKL-270 Description:
2000 Hennecke High Pressure foam
machine Model # HKL-270. Designed to dispense Urethane foam
compositions. This machine was cleaned before taken out of
service. It is said to have less than 2500 hours on it. It is in
like new condition. All manuals and program on Floppy disc.
Design
Parameters
Chemical
Ratio: 2:1 and 1:1
Flow: 210 Grams Second / maximum
Poly 1.02 Specific Gravity
ISO 1.20 Specific Gravity
Day Tanks:
60 Gallon ASME coded
Controller: Allen-Bradly, SLC-505
Temperature
Control: Required, 58-120 deg. F
Skid mounted
equipment includes:
· (2)
Insulated Day Tanks
· 2) Pump/Heat
Exchanger Modules
· (2) Metering
Pump Modules
· (2) Flow
Meters
· (1)
Hydraulic Unit and Control Valve Stand
· (1) Process
Diverter Valve Stand
Free Standing
Equipment Includes:
· (1) Tempered
Water Unit & Water Hoses
· (1)
MQ-12-2 Mixhead and Mixhead Hoses
·
(1) Mixhead Boom
2.0 System Data
Poly ISO
Metering Pumps (Rexroth)
A2VK12-SO2 A2VK12-SO2
Motor
HP 5 HP / 10 HP
5 HP / 10 HP
Motor
RPM
900/1800 900/1800
POLY
Output Range (lbs./Min
@1800.) 64.8 g/sec. to 260 g/sec @ 20% and 80%
8.58 lb/min. to 34.0 lb/min.
Output Range (lbs./Min
@900.) 32.4 g/sec. to 130 g/sec. @ 20% and 80%
4.3 lb/min to 17.2 lb/min
ISO
Output Range (lbs./Min
@1800.) 77.76 gr/sec to 311 g/sec @ 20% and 80%
10.29 lb/min to 41.19 lb/min
Output Range (lbs./Min
@900.) 38.88 g/sec to 155.5 g/sec @ 20% and 80%
5.5 lb/min to 20.59 lb/min
Total
Design Output (lbs./Min) 71.34 g/sec to 567 g/sec (9.45 to
75 lb/min)
Max. Pour Pressure
(psig) 3,000 3,000
3.0 Utility Requirements
Power Drop – Control
Panel 120 volt, 1 Phase, 60 Hz
Electrical
Power 460 Volts, 3 Phase, 60 Hz
Dry
Air/Nitrogen 10 CFM @ 80 psig,
-40f Dew Point
4.0 Equipment List
Description
Item #
Day Tank –
60 Gallon, Carbon Steel,
001
110 psig rating with ASME Stamp, Electrical
driven agitator,
pressure regulating valve. Auto fill is
controlled by a set of
proximity switches mounted on a guarded sight
glass. The
chemical return side is directed through a plate
and frame
heat exchanger to control the chemical
temperature from
58F to 120F (+/- 1 degree)
Polyol Feed Pump/Heat Exchanger Package
– 12 GPM
002
Mag drive Viking gear pump with suction side
strainer,
Pressure relief valve, and pressure guage.
Stainless steel
Plate and frame heat exchanger complete with
temperature
Transmitter, PID temperature controller, and 4
solenoid
Operated water supply and water return valves.
Controller
Mounted local to the heat exchanger.
ISO Feed Pump/Heat Exchanger Package
– 12 GPM
003
Mag drive Viking gear pump with suction side
strainer,
Pressure relief valve, and pressure guage.
Stainless steel
Plate and frame heat exchanger complete with
temperature
Transmitter, PID temperature controller, and 4
solenoid
Operated water supply and water return valves.
Controller
Mounted local to the heat exchanger.
Polyol Metering Pumps
- Rexroth A2VK12-SO2 axial piston pump
004
Equipped with suction side strainer, pressure
indicator,
high pressure switch, proof pressure switch, and
rupture disc.
20 lb/min to 100 lb/min @ 1.0 specific gravity.
Local
calibration diverter valve is included.
ISO Metering Pumps - Rexroth
A2VK12-SO2 axial piston pump
005
Equipped with suction side strainer, pressure
indicator,
high pressure switch, proof pressure switch, and
rupture disc.
20 lb/min to 100 lb/min @ 1.0 specific gravity.
Local
calibration diverter valve is included.
Mixhead – MQ-12-2 Large size 2
component, high pressure
006
Impingment mixing head with hydraulic nozzle
injectors,
adjustable hydraulic traverse throttling piston,
single stroke
cleanout piston, and through the head
calibration. Equipped
with a 1.3 mm Iso injector and a 3.0 mm Polyol
injector
Open pour 9.45 to 75 lb / min.
Mixhead Boom
– The boom assembly allows the operator
to 007
swing the head from side to side and up and
down and in and out.
This flexibility will accommodate many mold
configurations and
pouring arrangements.
Temperature Controllers (2)
–
008
Unit shall provide temperature control media at
35 gpm @ 30 psig,
@ 250 degees F maximum. Each unit is equipped
with a 9KW heater.
The temperature is controlled by a built in
microprocessor.
Hydraulic Power Unit – A self
contained hydraulic reservoir,
009
Pump and cooling heat exchanger is provided on
the metering system
Chemical Diverter Valve Stand –
Contains air actuated
010
"Worcester" diverter valves, and fluid controls
back pressure
control valves to allow circulation through the
mixhead at either
high or low pressure.
Main Control Panel – Vertical
face NEMA 12
011
Enclosure Housing an Allen Bradley DTAM-E
Operator
Interface module. The operator will have a
control box attached to the
mixhead with four pour buttons, e-stop button,
traverse piston selector
switch and cleanout piston selector switch. AB /
SLC 505 microprocessor
operates main control panel with various push
button controls.
Price
- $65,000 USD |
